|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Solid State Relay OCMOS FET PS7342-1A,PS7342L-1A 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7342-1A and PS7342L-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7342L-1A has a surface mount type lead. FEATURES * High isolation voltage (BV = 3 750 Vr.m.s.) * 1 channel type (1 a output) * Low LED Operating Current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6-pin DIP) * Low offset voltage * PS7342L-1A: Surface mount type * UL approved: File No. E72422 (S) * BSI approved: No. 8252/8253 * CSA approved: No. CA 101391 APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment Document No. PN10309EJ01V1DS (1st edition) (Previous No. P11566EJ6V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS7342-1A,PS7342L-1A PACKAGE DIMENSIONS (in millimeters) PS7342-1A 9.250.5 6 5 TOP VIEW 4 1. 2. 3. 4. 5. 6. LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 1 2 3 7.62 6.50.5 0.50.1 1.340.1 0.25 M 0 to 15 2.54 PS7342L-1A 9.250.5 6 5 TOP VIEW 4 1. 2. 3. 4. 5. 6. LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 1 2 3 6.50.5 1.340.1 0.25 M 2.54 0.90.25 9.600.4 2 Data Sheet PN10309EJ01V1DS PS7342-1A,PS7342L-1A ORDERING INFORMATION (Solder Contains Lead) Part Number PS7342-1A PS7342L-1A PS7342L-1A-E3 PS7342L-1A-E4 Embossed Tape 1 000 pcs/reel Package 6-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS7342-1A PS7342L-1A *1 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7342-1A-A PS7342L-1A-A PS7342L-1A-E3-A PS7342L-1A-E4-A Embossed Tape 1 000 pcs/reel Package 6-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS7342-1A PS7342L-1A *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10309EJ01V1DS 3 PS7342-1A,PS7342L-1A ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current MOS FET Break Down Voltage Continuous Load Current *2 *1 Symbol IF VR PD IFP VL Connection A Connection B Connection C IL Ratings 50 5.0 50 1 400 200 250 400 Unit mA V mW A V mA Pulse Load Current *3 ILP 400 mA (AC/DC Connection) Power Dissipation Isolation Voltage *4 PD BV PT TA Tstg 560 3 750 610 40 to +85 40 to +125 mW Vr.m.s. mW C C Total Power Dissipation Operating Ambient Temperature Storage Temperature *1 PW = 100 s, Duty Cycle = 1 % *2 Conditions: IF 2 mA. The following types of load connections are available. 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 4 IL IL L L IL + IL IL - + VL (DC) + VL (DC) - IL VL (AC/DC) L L + VL (DC) - Connection A IL Connection B Connection C *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 4 Data Sheet PN10309EJ01V1DS PS7342-1A,PS7342L-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Symbol VF IR ILoff Cout IFon Ron1 Ron2 IF = 10 mA VR = 5 V VD = 400 V Conditions MIN. TYP. 1.2 MAX. 1.4 5.0 Unit V A A pF 0.03 225 1.0 Output Capacitance Coupled LED On-state Current On-state Resistance VD = 0 V, f = 1 MHz IL = 200 mA IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 200 mA, t 10 ms , 2.0 6 10 mA Turn-on Time Turn-off Time *1 *1 ton toff RI-O CI-O IF = 10 mA, VO = 5 V, RL = 500 PW 10 ms 1.2 0.06 10 9 2.5 0.2 ms Isolation Resistance Isolation Capacitance VI-O = 1.0 kVDC V = 0 V, f = 1 MHz 1.1 pF *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor Rin RL ton toff VO monitor Output 90 % 10 % Data Sheet PN10309EJ01V1DS 5 PS7342-1A,PS7342L-1A TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 300 MAXIMUM LORD CURRENT vs. AMBIENT TEMPERATURE 80 200 60 40 100 20 0 -25 0 25 50 7585 100 0 -25 0 25 50 75 85 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.8 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 250 OUTPUT CAPACITANCE vs. APPLIED VOLTAGE f = 1 MHz 1.6 200 1.4 150 1.2 100 1.0 50 0.8 -25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10 -5 LORD CURRENT vs. LORD VOLTAGE 300 IF = 10 mA TA = 85 C 10-6 200 100 10-7 25 C 10-8 -200 10-9 0 -300 Load Voltage VL (V) -1.5 -1.0 -0.5 -100 0 0.5 1.0 1.5 100 200 300 400 500 Applied Voltage VD (V) 6 Data Sheet PN10309EJ01V1DS PS7342-1A,PS7342L-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA ON-STATE RESISTANCE DISTRIBUTION 30 25 20 15 10 5 0 n = 50 pcs, IF = 10 mA, IL = 10 mA 0 25 50 75 100 5.6 5.8 6.0 6.2 6.4 Ambient Temperature TA (C) On-state Resistance Ron ( ) TURN-ON TIME vs. FORWARD CURRENT 6 VO = 5 V 5 4 3 2 1 TURN-OFF TIME vs. FORWARD CURRENT 0.6 VO = 5 V 0.5 0.4 0.3 0.2 0.1 0 5 10 15 20 25 30 0 5 10 15 20 25 30 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 25 20 15 10 5 0 n = 50 pcs, IF = 10 mA, VO = 5 V 30 25 20 15 10 5 0 TURN-OFF TIME DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V 0.8 1.0 1.2 1.4 1.6 0.02 0.04 0.06 0.08 0.10 Turn-on Time ton (ms) Turn-off Time toff (ms) Data Sheet PN10309EJ01V1DS 7 PS7342-1A,PS7342L-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10309EJ01V1DS PS7342-1A,PS7342L-1A TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.5 +0.1 -0 4.5 MAX. 1.550.1 12.00.1 10.40.1 0.3 4.00.1 Tape Direction PS7342L-1A-E3 PS7342L-1A-E4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 R 1.0 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10309EJ01V1DS 9 PS7342-1A,PS7342L-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220 C * Time to preheat temperature from 120 to 180 C * Number of reflows * Flux 260 C or below (package surface temperature) 10 seconds or less 60 seconds or less 120 30 s Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less 120 C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10309EJ01V1DS |
Price & Availability of PS7342L-1A-E4-A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |